Board Surfaces Cleaning Instructions

E3

Every whiteboard within the Abstracta range are covered with E3 surface; an environment-friendly, glass enameled, sheet of steel.

As accessory, there is a special "White board kit" developed to fit the E3 surface containing: eraser, markers, pen holder, bottle of cleaning fluid and magnets.

Cleaning instructions

  1. Use only Drywipe Whiteboard markers. Ink is then easily removed with an eraser or paper towel. 
  2. Frequently used writing boards should be cleaned at least once a week, using a sponge or rag soaked in warm water, after wiping the board according to point 1. Do not use soap or similar products on the board.
  3. In cases of severely soiled surfaces, our special whiteboard cleaner should be used, after wiping the board according to point 1. Important - after using whiteboard cleaner, the surface should be rinsed with warm water and allowed to dry.
  4. If by accident Permanent markers are used, clean according to point 3. If the damage covers only a small area, fill the lines with a Drywipe Whiteboard marker and wipe immediately.

 

SilverPro™

SilverPro™ - Magnetic glass board suitable for image projection in 4:3 and 16:9 format. This means, no projection screen needs to be added, just project direct to the glass board!

As accessory, there is a special "Magnetic glass board kit" developed to fit the SilverPro surface containing: eraser + felts, markers and magnets.

Abstracta has received a Platinum Award for exceptional and outstanding design for its series of SilverPro products.

Cleaning instructions

  1. Use only Drywipe Whiteboard markers. Ink is then easily removed with an eraser or paper towel.
  2. Frequently used writing boards should be cleaned at least once a week, using a sponge or rag soaked in warm water, after wiping the board according to point 1. Do not use soap or similar products on the board.
  3. In cases of severely soiled surfaces, our special whiteboard cleaner should be used, after wiping the board according to point 1. Important - after using whiteboard cleaner, the surface should be rinsed with warm water and allowed to dry.
  4. If by accident Permanent markers are used, clean according to point 3. If the damage covers only a small area, fill the lines with a Drywipe Whiteboard marker and wipe immediately.

 

Optic white glass

Tempered optic white flat glass with lacquered, tempered backside. For some of the products with optic white glass surface, for example Vision, a magnet rail can be added since the glass surface is not magnetic. 

As accessory, there is a special "Glass board kit" developed to fit the Optic white glass surface containing: eraser and markers.

Cleaning instructions

  1. Use only Drywipe Whiteboard markers. Ink is then easily removed with an eraser or paper towel. 
  2. Frequently used writing boards should be cleaned at least once a week, using a sponge or rag soaked in warm water, after wiping the board according to point 1. Do not use soap or similar products on the board.
  3. In cases of severely soiled surfaces, our special whiteboard cleaner should be used, after wiping the board according to point 1. Important - after using whiteboard cleaner, the surface should be rinsed with warm water and allowed to dry.
  4. If by accident Permanent markers are used, clean according to point 3. If the damage covers only a small area, fill the lines with a Drywipe Whiteboard marker and wipe immediately.

How can we help?

If you'd like assistance with our products why not ask us to
get in touch?